Features:
1. Easy to install The appearance design of the relay makes the installation very convenient.
2. Wide working voltage 10-40V DC, compatible for vehicles on the market!
3.Remote fuel cut and continue fuel. Once your vehicle is stolen or encounters any emergency, you can stop the vehicle by remotely cut fuel via SMS command or APP. Of course, you can also restore fuel remotely.
4. GPS+LBS dual positioning mode, if the GPS signal is good, the device will be positioned via GPS satellites, otherwise the device will be positioned via LBS! In GPS positioning mode, the accuracy is 5-10 meters, and in LBS positioning mode, the accuracy is 100-1000 meters!
5. Real-time tracking You can track the device in real-time on Maps via mobile phones, tablets and computers, and the minimum data upload interval is 10 seconds!
6. Historical route playback The APP and web server can record device upload data for up to 6 months, and you can play back historical routes at any time!
7. Power saving mode automatically enters standby mode without vibration for 3 minutes, and enters working mode when vibration is detected again.
8. Overspeed alarm. This alarm is only valid in continuous positioning mode. When the crew speed exceeds your preset speed, it will send a message ldquospeed alarm!rdquo to the administrator number every 5 minutes.
9. Vibrating alarm. After setting the vibrating alarm, please keep the bracelet still for 5 minutes, this function will start to work. When the device receives an electric shock, it will send a text message "ldquosensor alarm!rdquo" to the administrator number.
10. Mobile alarm. When the device is stationary in a place for 10 minutes, the user can set the mobile alarm through the "move+passord" command. If the device moves 500m, it will send an alarm message "mobile alarm + latitude" and longitude" Authorization number.
11. Virtual fence. Set a virtual fence for the tracker to restrict its movement in the area. When the unit enters and exits the zone, it will send alarm information to the APP and Web server.
12. Sleep mode, time-based sleep mode After completing this setting, the tracker will only work for 5 minutes after being awakened, and then return to sleep mode, GPS will be turned off, and GSM will work in low power consumption mode. You can wake up the tracker by text message or call. Vibration sensing sleep mode. After this setting, if there is no vibration for 5 minutes, the tracker will work in the "vibration sleep" mode, the GPS will be turned off, and the GSM will work in a low power consumption state. Vibration, text messages, and calls can all wake up the tracker.
13. Illegal wire cutting alarm. In the arming mode, if someone cuts the wire of the device, the alarm information can be obtained from the device.

Descriptions:
Name: Vehicle GPS locator
Material: ABS
Colour: Black
Memory: TF card (not included)
GPS positioning accuracy: 10 (m)
Alarm mode: vibration alarm, power failure alarm, movement alarm, fence alarm, overspeed alarm
Backup battery: polymer lithium battery 100mah
Battery life: 72 (h)
Antenna type: LBS+GPS
External power supply form: Yes (connect to car power supply)
Network: 2GGSM/GPRS
System: 2G GSM: 850/900/1800/1900Mhz
GPS sensitivity: -159dBm
LBS range: 100-2000 meters
Working voltage: 10-40V DC

Package included:
1*GPS locator
1*Instruction